3Com 5500G-EI - Display Ip Statistics

136 CHAPTER 5: USING NETWORK PROTOCOL COMMANDS
LA = 0.0.0.0:23, FA = 0.0.0.0:0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_KEEPALIVE SO_SENDVPNID
SO_SETKEEPALIVE,
socket state = SS_PRIV SS_ASYNC
Task = VTYD(18), socketid = 2, Proto = 6,
LA = 10.153.17.99:23, FA = 10.153.17.56:1161,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_KEEPALIVE SO_OOBINLINE SO_SENDVPNID
SO_SETKEEPALIVE,
socket state = SS_ISCONNECTED SS_PRIV SS_ASYNC
Task = VTYD(18), socketid = 3, Proto = 6,
LA = 10.153.17.99:23, FA = 10.153.17.82:1121,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_KEEPALIVE SO_OOBINLINE SO_SENDVPNID
SO_SETKEEPALIVE,
socket state = SS_ISCONNECTED SS_PRIV SS_ASYNC
display ip statistics Syntax
display ip statistics
View
Any View
Parameter
None
Description
Use the display ip statistics command to view the statistics information
about IP packets.
Related commands: display ip interface , reset ip statistics.
Tab le 14 Output Description of the display ip socket Command
Field Description
SOCK_STREAM The socket type
Task The ID of a task
socketid The ID of a socket
Proto The protocol number used by the socket
sndbuf The sending buffer size of the socket
rcvbuf The receiving buffer size of the socket
sb_cc The current data size in the sending buffer. The value makes sense
only for the socket of TCP type, because only TCP is able to cache
data
rb_cc The current data size in the receiving buffer
socket option The option of the socket
socket state The state of the socket