3Com 5500G-EI - Rmdir; Undelete

410 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
View
User view
Parameter
file-path : Name of the file to be deleted.
/force : Delete files from the recycle bin without prompt.
Description
Use the reset recycle-bin command to permanently delete files from the
recycle bin.
The delete command only puts the file into the recycle bin, but the reset
recycle-bin
command will delete this file permanently.
Example
Delete the file from the recycle bin.
<SW5500>reset recycle-binflash:/p1h_logic.out
Clear unit1>flash:/plh_logic.out? [Y/N]:
rmdir Syntax
rmdir directory
View
User view
Parameter
directory : Directory name.
Description
Use the rmdir command to delete a directory. The directory to be deleted must be
empty.
Example
Delete the directory test.
<SW5500>rmdir test
Rmdir unit1>flash:/test?[Y/N]:y
..Removed directory unit1>flash:/test
undelete Syntax
undelete file-path
View
User view
Parameter
file-path : Name of the file to be recovered.