3Com 5500G-EI - Debugging Pim Sm

PIM Configuration Commands 267
undo debugging pim dm { alert | all | mrt | timer | warning | { recv
| send } { all | assert | graft | graft-ack | join | prune } }
View
User View
Parameter
alert: interoperation event debugging information of PIM-DM
all: all the debugging information of PIM-DM.
mrt: debugging information of PIM-DM multicast routing table.
timer: debugging information of PIM-DM timer.
warning: debugging information of PIM-DM warning message.
recv: debugging information of PIM-DM receiving packets.
send: debugging information of PIM-DM sending packets.
all | assert | graft | graft-ack | join | prune: packets type.
Description
Use the debugging pim dm to enable PIM-DM debugging functions.
Use the undo debugging pim dm to disable the debugging functions.
By default, PIM-DM debugging functions are disabled.
Example
Enable all PIM-DM debugging functions
<SW5500>debugging pim dm all
debugging pim sm Syntax
debugging pim sm { all | register-proxy | mrt | warning | mbr {alert
| fresh } | timer { assert | bsr | crpadv | jp | jpdelay | mrt |
probe | spt } | { recv | send } { assert | bootstrap | crpadv | reg |
regstop | jp } }
undo debugging pim sm { all | register-proxy | mrt | warning | mbr
{alert | fresh } | timer { assert | bsr | crpadv | jp | jpdelay | mrt
| probe | spt } | { recv | send } { assert | bootstrap | crpadv | reg
| regstop | jp } }
View
User View
Parameter
mbr: debugging information of PIM-SM multicast border router event.
register-proxy: debugging information of PIM-SM IO registry proxy.