3Com 5500G-EI - Display Ftp-Server; Display Ftp-User; Ftp Server

FTP Server Configuration Commands 417
display ftp-server Syntax
display ftp-server
View
All views
Parameter
None
Description
Use the display ftp-server command to display the parameters of the current
FTP Server. You can perform this command to verify the configuration after setting
FTP parameters.
Example
Display the configuration of FTP Server parameters.
<SW5500>display ftp-server
Ftp server is running
Max user number 5
User count 0
Timeout(minute) 30
display ftp-user Syntax
display ftp-user
View
All views
Parameter
None
Description
Use the display ftp-user command to display the parameters of current FTP
user. You can perform this command to examine the configuration after setting
FTP parameters.
Example
Show the configuration of FTP user parameters.
<SW5500>display ftp-user
% No ftp user
ftp server Syntax
ftp server enable
undo ftp server
View
System view