Multicast Common Configuration Commands 249
Related commands: reset pim routing-table, reset multicast
routing-table
and display multicast forwarding-table.
Example
Clear the forwarding entry with address of 225.5.4.3 from the MFC forwarding
table.
<SW5500>reset multicast forwarding-table 225.5.4.3
Clear statistic information of the forwarding entry with address of 225.5.4.3 from
the MFC forwarding table.
<SW5500>reset multicast forwarding-table statistics 225.5.4.3
reset multicast
routing-table
Syntax
reset multicast routing-table { all | {
group-address
[ mask {
group-mask | group-mask-length
} ] |
source-address
[ mask {
source-mask | source-mask-length
} ] | { incoming-interface
interface-type interface-number
} } * }
View
User View
Parameter
all: All route entries in the core multicast routing table.
group-address
: Specifies group address.
group-mask
: Specifies Mask of group address
group-mask-length
: Specifies mask length of group address.
source-address
: Specifies source address.
source-mask
: Specifies mask of source address.
source-mask-length
: Specifies mask length of source address.
incoming-interface: Specifies incoming interface for the forward entry.
interface-type interface-number
: Interface type and interface number.
Description
Use the reset multicast routing-table command to clear route entries from
the core multicast routing table, as well as MFC forwarding entries.
Type in the source address first and group address after in the command, ensure
that both addresses are valid. The system prompts error information if invalid
addresses are entered.
Related commands: reset pim routing-table, reset multicast
forwarding-table
and display multicast forwarding-table.
To Next Page
Loading...
