88 CHAPTER 3: USING VLAN COMMANDS
Parameter
oui:
The MAC address to be set, in the format H-H-H.
oui_mask:
The valid length of a MAC address, represented by a mask, and in the
format H-H-H.
description string:
Description of the MAC address, in the range of 1 to 30.
Description
Use the voice vlan
mac-address
command to set the MAC address that the
Voice VLAN can control. Use the
undo voice vlan mac-address command to
cancel this MAC address.
Here the OUI address refers to a vendor . The OUI address system can learn 16
MAC addresses at most. There are four default OUI addresses after the system
starts:
For the related command, see display voice vlan oui.
Example
To set the MAC address 00AA-BB00-0000 as an OUI address, enter the following.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]voice vlan mac-address 00aa-bb00-0000 mask ffff-ff00-0000
description ABC
voice vlan mode Syntax
voice vlan mode auto
undo voice vlan mode auto
View
System View
Parameter
None
Description
Use the voice vlan mode auto command to set the Voice VLAN in auto mode.
Use the
undo voice vlan mode auto command to set the Voice VLAN in manual
mode.
Tab le 8 Default OUI Addresses
No. OUI Description
1 00:E0:BB 3Com phone
2 00:03:6B Cisco phone
3 00:E0:75 Polycom phone
4 00:D0:1E Pingtel phone
To Next Page
Loading...
