SNMP Configuration Commands 483
Description
Use the snmp-agent local-engineid command to configure a name for a local
or remote SNMP engine on the Switch. Use the
undo snmp-agent
local-engineid
command to restore the default setting of engine ID.
Device information is determined according to different products. It can be IP
address, MAC address or user defined text. However, you must use numbers in
hexadecimal form.
Example
Configure the ID of a local or remote device as 1234512345.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
<SW5500>snmp-agent local-engineid 1234512345
snmp-agent mib-view Syntax
snmp-agent mib-view { included | excluded }
view-name
oid-tree
undo snmp-agent mib-view
view-name
View
System view
Parameter
included: Include this MIB subtree.
excluded: Exclude this MIB subtree.
view-name:
Specify the view name, with a character string, ranging from 1 to 32
characters.
oid-tree:
MIB object subtree. It can be a character string of the variable OID, or a
variable name, ranging from 1 to 255 characters.
Description
Use the snmp-agent mib-view command to create or update the view
information. Use the
undo snmp-agent mib-view command to delete the view
information
By default, the view name is v1default. OID is 1.3.6.1.
Both the character string of OID and the node name can be input as parameter.
Example
Create a view that consists of all the objects of MIB-II.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]snmp-agent mib-view included mib2 5.6.1.3
snmp-agent packet
max-size
Syntax
snmp-agent packet max-size
byte-count
To Next Page
Loading...
