3Com 5500G-EI - Voice Vlan Aging; Voice Vlan Enable

86 CHAPTER 3: USING VLAN COMMANDS
Voice Vlan status: ENABLE
Voice Vlan ID: 2
Voice Vlan configuration mode: AUTO
Voice Vlan security mode: Security
Voice Vlan aging time: 100 minutes
Current voice vlan enabled port:
--------------------------------
Ethernet1/0/2, Ethernet1/0/3,
voice vlan aging Syntax
voice vlan aging minutes
undo voice vlan aging
View
System View
Parameter
minutes: The aging time of Voice VLAN, in minutes, ranging from 5 to 43200.
The default value is 1440 minutes.
Description
Use the voice vlan aging command to set the aging time of Voice VLAN. Use
the
undo voice vlan aging command to set the aging time back to the default.
Related commands: display voice vlan status.
Example
To set the aging time of Voice VLAN to 100 minutes, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]voice vlan aging 100
voice vlan enable Syntax
voice vlan enable
undo voice vlan enable
View
Ethernet Port View
Parameter
None
Description
Use the voice vlan enable command to enable the Voice VLAN features on the
port. Use the
undo voice vlan enable command to disable the Voice VLAN
features on the port.