RADIUS Protocol Configuration Commands 375
undo data-flow format
View
RADIUS Scheme View
Parameter
data: Set data unit.
byte: Set 'byte' as the unit of data flow.
giga-byte: Set 'giga-byte' as the unit of data flow.
kilo-byte: Set 'kilo-byte' as the unit of data flow.
mega-byte: Set 'mega-byte' as the unit of data flow.
packet: Set data packet unit.
giga-packet: Set 'giga-packet' as the unit of packet flow.
kilo-packet: Set 'kilo-packet' as the unit of packet flow.
mega-packet: Set 'mega-packet' as the unit of packet flow.
one-packet: Set 'one-packet' as the unit of packet flow.
Description
■ Use the data-flow-format command to configure the unit of data flow that
is sent to the RADIUS Server.
■ Use the undo data-flow format command to restore the unit to the default
setting.
By default, the data unit is byte and the data packet unit is one-packet.
Related command: display radius.
Example
To set the unit of data flow that is sent to kilo-byte and the data packet to
kilo-packet, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]radius scheme 3Com
New Radius scheme
[SW5500-radius-3Com]data-flow-format data kilo-byte packet
kilo-packet
display local-server
statistics
Syntax
display local-server statistics
View
All views
To Next Page
Loading...
