3Com 5500G-EI - Display History-Command; Display User-Interface

Logging in Commands 27
Example
To configure the data bits of the AUX (Console) port to 7 bits, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]user-interface aux 0
[SW5500-ui-aux0]databits 7
display
history-command
Syntax
display history-command
View
All views
Parameter
None
Description
Use the display history-command command to view the commands previously
entered during this login session, up to a specified maximum.
To set the maximum number of commands to display, see history-command
max-size
.
Example
To display previously entered commands, enter the following.
<SW5500>display history-command
The commands display on screen.
display user-interface Syntax
display user-interface [ type number | number ] [summary]
View
All views
Parameter
type number: Enter the type and number of the user interface you want to
display details on, for example VTY 3.
number: Enter the index number of the user interface you want to display details
on.
summary: Display the summary of a user interface.
Description
Use the display user-interface command to view information on a user
interface. You can choose to access this information by user interface type and
type number, or by user interface index number. The information displayed is the
same whichever access method you use.