3Com 5500G-EI - Snmp-Agent Sys-Info

484 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
undo snmp-agent packet max-size
View
System view
Parameter
byte-count: Specify the size of SNMP packet (measured in bytes), ranging from
484 to 17940; the default size is 1500 bytes.
Description
Use the snmp-agent packet max-size command to configure the size of SNMP
packet that the Agent can send/receive. Use the
undo snmp-agent packet
max-size
command to restore the default size of SNMP packet.
The sizes of the SNMP packets received/sent by the Agent are different in different
network environments.
Example
Set the size of SNMP packet to 1042 bytes.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]snmp-agent packet max-size 1042
snmp-agent sys-info Syntax
snmp-agent sys-info { contact sysContact | location sysLocation |
version { { v1 | v2c | v3 } * | all } }
undo snmp-agent sys-info [ { contact | location }* | version { { v1 |
v2c | v3 }* | all } ]
View
System view
Parameter
sysContact: Specify a character string describing the system maintenance
contact (in bytes), with a length ranging from 1 to 255. The default contact
information is "3Com Marlborough USA".
sysLocation: Specify a character string to describe the system location. By
default, the character string is "Marlborough USA".
version: version of running SNMP.
v1: SNMP V1.
v2c: SNMP V2C.
v3: SNMP V3.
all: all SNMP version (includes SNMP V1, SNMP V2C, SNMP V3).