3Com 5500G-EI - Display Ssh Server; Display Ssh User-Information

SSH Configuration Commands 515
1023 abcd
1024 hq
1024 wn1
1024 hq_all
<SW5500>display rsa peer-public-key name abcd
Key name:abcd
Key address:
Data:
30818602 8180739A 291ABDA7 04F5D93D C8FDF84C 42746319 91C164B0
DF178C55 FA833591 C7D47D53 81D09CE8 2913D7ED F9C08511 D83CA4ED
2B30B809 808EB0D1 F52D045D E40861B7 4A0E1355 23CCD74C AC61F8E5
8C452B2F 3F2DA0DC C48E3306 367FE187 BDD94401 8B3B69F3 CBB0A573
202C16BB 2FC1ACF3 EC8F828D 55A36F1C DDC4BB45 504F0201 25
display ssh server Syntax
display ssh server { session | status }
View
All views
Parameter
session: Displays SSH sessions.
status: Displays SSH state information.
Description
Use the display ssh server command to display SSH state or session
information.
Related commands: ssh server authentication-retries, ssh server
rekey-interval
, ssh server timeout.
Example
To display SSH state and configuration parameters, enter the following:
<SW5500>display ssh server status
SSH version : 1.5
SSH connection timeout : 60 seconds
SSH server key generating interval : 1 hours
SSH Authentication retries : 3 times
To display SSH sessions.
<SW5500>display ssh server session
Connection Version Encryption State Username
VTY0 1.5 DES Session started SW5500
VTY3 1.5 DES Session started switch
display ssh
user-information
Syntax
display ssh user-information [ username ]
View
All views