3Com 5500G-EI - Display Rsa Peer-Public-Key

514 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
Parameter
None
Description
Use the display rsa local-key-pair public command to display local key pair
and public key of the server. If no key is generated, corresponding information will
be prompted, for example, “RSA keys not found”.
Related command: rsa local-key-pair create.
Example
To display local key pair and public key of the server, enter the following:
<SW5500>display rsa local-key-pair public
% Key pair was generated at: 12:26:33 UTC 2002/4/4
Key name: rtvrp_Host
Usage: Encryption Key
Key Data:
30470240 AF7DB1D0 DA78944F 53B7B59B 40D425D0 DC9C57D2 A60916C2
1F165807 08B84DDB 5F4DB8E7 A115B74E 2D41D96C AC61D276 AA027E41
DD48DE64 696E0934 EB872805 02030100 01
% Key pair was generated at: 12:26:45 UTC 2002/4/4
Key name: rtvrp_Server
Usage: Encryption Key
Key Data:
30670260 C05280D9 BA0D56C8 7BE43379 8634CDE7 83ABA9A2 3F36280E
25995487 4FF6AD7A 0E57871C 761E6D92 9914D8C5 CC577388 5B580B94
C2172C8F 36039EED 160A0478 651DED3A 9CCF1AAD D800AAF2 DF7FBEC4
A13ADA59 9E738319 AF366B8B 519D39F5 02030100 01
display rsa
peer-public-key
Syntax
display rsa peer-public-key [ brief | name keyname ]
View
All views
Parameter
brief: Displays brief information of the remote public key.
keyname : Specifies key name, a string including 0~32 characters.
Description
Use the display rsa peer-public-key command to display a designated RSA
public key. All public keys will be displayed if no key is specified.
Related command: rsa local-key-pair create.
Example
To display a designated RSA public key, enter the following:
<SW5500>display rsa peer-public-key
Address Bits Name