3Com 5500G-EI - Display Fib; Display Fib Ip-Prefix

IP Performance Configuration Commands 133
Destination/Mask Nexthop Flag TimeStamp Interface
127.0.0.0/8 127.0.0.1 U t[0] InLoopBack0
display fib Syntax
display fib | { { begin | include | exclude } text }
View
Any view
Parameters
begin Enter to display the FIB entries from the first one containing the character
string text.
include Enter to display only those FIB entries containing the character string text.
exclude Enter to display only those FIB entries excluding the character string text.
text Enter string of specific characters.
Description
Use the display fib command to view the FIB entries which are output from the
buffer according to regular expression and related to the specific character string.
Example
To display the lines starting from the first one containing the string 169.254.0.0,
enter the following:
<SW5500>display fib | begin 169.254.0.0
Destination/Mask Nexthop Flag TimeStamp Interface
169.254.0.0/16 2.1.1.1 U t[0] Vlan-interface1
2.0.0.0/16 2.1.1.1 U t[0] Vlan-interface1
display fib ip-prefix Syntax
display fib ip-prefix listname
View
Any view
Parameter
listname Enter prefix list name, a string of one to 19 characters.
Description
Use the display fib ip-prefix command to view the FIB entries matching the
specific prefix list.
Example
To display the FIB entries matching prefix list abc0, enter the following:
<SW5500>display fib ip-prefix abc0
Route Entry matched by prefix-list abc0:
Summary count: 3
Destination/Mask Nexthop Flag TimeStamp Interface
127.0.0.0/8 127.0.0.1 U t[0] InLoopBack0