356 CHAPTER 11: USING AAA AND RADIUS COMMANDS
mac-authentication Syntax
mac-authentication [ interface
interface-list
]
undo mac-authentication [ interface
interface-list
]
View
Ethernet Port View
Parameter
interface
interface-list:
Ethernet interface list including several Ethernet
interfaces, expressed in the format
interface-list
= {
interface-num
[ to
interface-num
] } & < 1-10 >.
interface-num
specifies a single Ethernet
interface in the format
interface-num
= {
interface-type interface-num
|
interface-name
}, where
interface-type
specifies the interface type,
interface-num
specifies the interface number and
interface-name
specifies the
interface name. For the respective meanings and value ranges, see the parameters
in the Port Command chapter.
Tab le 52 Description of MAC address authentication configuration information
Field Description
mac address authentication
is Enabled
The MAC address authentication feature is enabled
on the switch
offline detect period Offline-detect timer, set the time interval for the
Switch to detect whether the user is offline. By
default, it is 300 seconds.
quiet period Quiet timer. A period of quiet time that the Switch
needed after failing to authenticate the user.
server response timeout
value
Server timeout timer, set the timeout period to the
connection between the Switch to the RADIUS
server.
max allowed user number The maximum number of users allowed by the
Switch.
current user number amounts Current user number.
current domain Current domain, by default, it is null.
Silent Mac User info The silent user information. If a user does not pass
the MAC address authentication, the Switch sets this
user to be silent, in this period of time, the Switch
does not authenticate this user.
GigabitEthernet1/0/1 is
link-up
Interface GigabitEthernet1/0/1 link is in the up state.
MAC address authentication
is Enabled
MAC address authentication is enabled on interface
GigabitEthernet1/0/1
Authenticate success: 0,
failed: 0
The statistics of the MAC address authentication on
the interface, including the number of users passing
the authentication and the number of users failing
the authentication.
Authenticate state There are four states of the online users:
■ Connecting: the user is connecting
■ Success: the user has passed the authentication
■ Failure: the user has failed the authentication
■ Logoff: the user is offline.
To Next Page
Loading...
