3Com 5500G-EI - Device Management Commands; Boot Boot-Loader; Boot Bootrom; Display Boot-Loader

436 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
Device Management
Commands
This section describes the device management commands available on your Switch
5500G-EI.
boot boot-loader Syntax
boot boot-loader file-path
View
User view
Parameter
file-path: Path and name of APP file.
Description
Use the boot boot-loader command to specify the app file used for booting next
time.
You can not specify the app file stored in another Unit as the boot application of a
Unit.
Example
Specify the APP application used for booting next time.
<SW5500>boot boot-loader unit1>flash:/PLATV100R002B09D002.APP The
specifed file will be booted next time!
<SW5500>
boot bootrom Syntax
boot bootrom file-path
View
User view
Parameter
file-path: File path and file name of Bootrom.
Description
Use the boot bootrom command to upgrade bootrom.
Example
Upgrade bootrom of the switch.
<SW5500>boot bootrom PLATV100R002B09D002.btm
display boot-loader Syntax
display boot-loader [unit unit-id ]
View
All views