3Com 5500G-EI - Pim DM; Pim Neighbor-Limit

PIM Configuration Commands 273
Related command: c-bsr.
Example
Configure domain border on VLAN-interface10.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]interface Vlan-interface-10
[SW5500-vlan-interface10]pim bsr-boundary
pim dm Syntax
pim dm
undo pim dm
View
Interface View
Parameter
None
Description
Use the pim dm to enable PIM-DM (Dense Mode).
Use the undo pim dm to disable PIM-DM.
By default, PIM-DM is disabled.
Once PIM-DM is enabled on an interface, PIM-SM cannot be enabled on the same
interface and vice versa.
Example
Enable PIM DM on VLAN-interface10 of the Ethernet Switch.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]multicast routing-enable
[SW5500]interface Vlan-interface-10
[SW5500-vlan-interface10]pim dm
pim neighbor-limit Syntax
pim neighbor-limit limit
undo pim neighbor-limit
View
VLAN Interface View
Parameter
limit : Limits of PIM neighbors on the interface, in the range of 0~128.