500 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
Example
Delete line 10 from the extended RMON alarm table.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]undo rmon prialarm 10
rmon statistics Syntax
rmon statistics
entry-number
[ owner
text-string
]
undo rmon statistics
entry-number
View
Ethernet port view
Parameter
entry-number:
Number of the entry to be added/deleted, ranging from 1 to
65535.
owner
text-string:
Creator of the entry. Length of the character string ranges
from 1 to127.
Description
Use the rmon statistics command to add an entry to the statistic table. Use the
undo rmon statistics command to delete an entry from statistic table.
RMON statistic management concerns the statistics and monitoring of the usage
and error on a port. Statistics includes collision, CRC (Cyclic Redundancy Check)
and queue, undersized or oversized packet, timeout, fragment, broadcast,
multicast, unicast, and bandwidth utility.
Example
Add the statistics of GigabitEthernet 1/0/1to entry 20 of the statistics table.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface GigabitEthernet1/0/1
[SW5500-gigabitethernet1/0/1]rmon statistics 20
To Next Page
Loading...
