3Com 5500G-EI - Scheme

370 CHAPTER 11: USING AAA AND RADIUS COMMANDS
Parameter
radius-scheme-name : Specifies a RADIUS scheme, with a character string not
exceeding 32 characters.
Description
Use the radius-scheme command to configure the RADIUS scheme used by the
current ISP domain.
This command is used to specify the RADIUS scheme for the current ISP domain.
The specified RADIUS scheme shall have been created.
Related commands: radius scheme, display radius.
Example
The following example designates the current ISP domain, marlboro.net, to use
the RADIUS server, Radserver.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]domain marlboro.net
[SW5500-isp-marlboro.net]radius-scheme Radserver
scheme Syntax
scheme { radius-scheme radius-scheme-name [ local ] | local | none }
undo scheme { radius-scheme | none }
View
ISP Domain View
Parameter
radius-scheme-name: RADIUS scheme, a character string not exceeding 32
characters.
local: Local authentication.
none: No authentication.
Description
Use the scheme command to configure the AAA scheme to be referenced by the
current ISP domain. Use the
undo scheme command to restore the default AAA
scheme.
The default AAA scheme is local.
When using scheme radius-scheme radius-scheme-name local in the
configuration command, the
local refers to the alternative authentication
scheme if the RADIUS server does not respond normally. That is, when the RADIUS
server operates normally, the local scheme is not used; otherwise, the local scheme
is used. When using
scheme radius-scheme radius-scheme-name (without
local), the local scheme does not work when there is no normal response