Multicast Common Configuration Commands 243
Use the undo debugging multicast kernel-routing to disable the debugging
functions.
Example
Enable multicast kernel routing debugging functions.
<SW5500>debugging multicast kernel-routing
debugging multicast
status-forwarding
Syntax
debugging multicast status-forwarding
undo debugging multicast status-forwarding
View
User View
Parameter
None
Description
Use the debugging multicast status-forwarding to enable multicast
forwarding status debugging functions.
Use the undo debugging multicast status-forwarding to disable the
debugging functions.
Example
Enable multicast forwarding status debugging functions.
<SW5500>debugging multicast status-forwarding
display multicast
forwarding-table
Syntax
display multicast forwarding-table [
group-address
[ mask {
mask |
mask-length
} ] |
source-address
[ mask {
mask | mask-length
} ] |
incoming-interface {
interface-type interface-number
| register }]*
View
Any View
Parameter
group-address
: Multicast group address, used to specify a multicast group,
ranging from 224.0.0.0 to 239.255.255.255.
source-address:
Unicast IP address of the multicast source.
incoming-interface: Incoming interface of the multicast forwarding table.
register: Register interface of PIM-SM.
Description
Use the display multicast forwarding-table to view the information of IP
multicast forwarding table.
To Next Page
Loading...
