3Com 5500G-EI - Ssh User Assign Rsa-Key

522 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
Parameter
seconds : Defines registration timeout value, in the range of 1~120 seconds.
Description
Use the ssh server timeout command to define timeout value for SSH
registration authentication, which takes effect at next logon.
Use the undo ssh server timeout command to restore the default value.
By default, the timeout value is 60 seconds.
Related command: display ssh server.
Example
To define the registration timeout value as 80 seconds, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]ssh server timeout 80
ssh user assign rsa-key Syntax
ssh user username assign rsa-key keyname
undo ssh user username assign rsa-key
View
System view
Parameter
keyname : Configures client public key, consisting of 1~32 characters.
username : Valid local user name or user name defined by remote RADIUS system.
Description
Use the ssh user username assign rsa-key command to associate an existing
public key with a designated user.
Use the undo ssh user username assign rsa-key command to delete the
association.
For a user who has been associated with a public key, the command associates
him/her with the new public key.
The newly configured users take effect at the next logon.
Related command: display ssh user-information.
Example
To associate the key 1 with jsmith, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]ssh user jsmith assign rsa-key key1