3Com 5500G-EI - Messenger

368 CHAPTER 11: USING AAA AND RADIUS COMMANDS
ssh: The specified user type is ssh.
terminal: The specified user type is terminal which refers to users who use the
terminal service (login from the console port).
all: All the users.
Description
Use the local-user command to configure a local user and enter the local user
view. Use the
undo local-user command to cancel a specified local user.
By default, no local user.
Related commands: display local-user, server-type.
Example
To add a local user named 3Com1, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]local-user 3Com1
[SW5500-luser-3Com1]
messenger Syntax
messenger time { enable limit interval | disable }
undo messenger time
View
ISP Domain View
Parameter
limit : Remaining-online-time threshold in minutes, in the range of 1 to 60. When
the remaining online time of a user is equal to this threshold, the Switch begins to
send alert messages to the client.
interval : Sending interval of alert messages in minutes, in the range of 5 to 60.
Description
Use the messenger time enable command to enable messenger alert and
configure the related parameters.
Use the messenger time disable command to disable messenger alert.
Use the undo messenger time command to restore messenger alert to default
settings.
By default, the messenger alert is disabled on the Switch.
This function allows the clients to inform the online users about their remaining
online time through message alert dialog box.
The implementation of this function is as follows:
■ On the Switch, use the messenger time enable command to enable this
function and to configure the remaining-online-time threshold (the
limit
argument) and the alert message interval.