498 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
owner
rmon-station:
Name of the network management station that creates
this entry. The length of the character string ranges from 1 to 127.
Description
Use the rmon event command to add an entry to the event table. Use the undo
rmon event
command to delete an entry from this table.
Event management of RMON defines the way to deal with event number and
event-log, send trap message or log while sending trap message. In this way,
alarm events may obtain corresponding treatment
Example
Add the entry 10 to the event table and mark it as log event.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]rmon event 10 log
rmon history Syntax
rmon history
entry-number
buckets
number
interval
sampling-interval
[ owner
text-string
]
undo rmon history
entry-number
View
Ethernet port view
Parameter
entry-number:
Number of the entry to be added/deleted, ranging from 1 to
65535.
buckets
number
: Capacity of the history table corresponding to the control line.
interval
sampling-interval
: Sampling interval, ranging from 5 to 3600
(measured in seconds).
owner text-string: Creator of the line. Length of the character string ranges from
1 to127.
Description
Use the rmon history command to add an entry to the history control table. Use
the
undo rmon history command to delete an entry from history control table.
Perform this command to sample, set sample parameter (sample time interval) and
storage amounts for a port. RMON will periodically perform data collection and
save for query on this port. Sample information includes utility, error number and
total packet number.
Example
Delete the entry 15 from the history control table.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface GigabitEthernet1/0/1
To Next Page
Loading...
