404 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
Parameter
/unreserved
: The file will be deleted permanently if the user chooses this
parameter.
file-path:
Path and name of the file you want to delete.
Description
Use the delete command to delete a specified file from the storage device of the
Switch.
The deleted files are kept in the recycle bin and will not be displayed when you use
the
dir command. However they will be displayed, using the dir /all command.
The files deleted by the
delete command can be recovered with the undelete
command or deleted permanently from the recycle bin, using the
reset recycle-bin command.
If two files with the same name in a directory are deleted, only the latest deleted
file will be kept in the recycle bin.
Example
Delete the file flash:/test/test.txt
<SW5500>delete flash:/test/test.txt
Delete unit1>flash:/test/test.txt?[Y/N]:
dir Syntax
dir [ /all ] [
file-path
]
View
User view
Parameter
/all: Display all the files (including the deleted ones).
file-path
: File or directory name to be displayed. The
file-path
parameter
supports “*” matching. For example, using
dir *.txt will display all the files with
the extension
txt in the current directory.
dir without any parameters will display the file information in the current
directory.
Description
Use the dir command to display the information about the specified file or
directory in the storage device of the Switch.
Example
Display the information for file flash:/test/test.txt
<SW5500>dir flash:/test/test.txt
Directory of unit1>flash:/test/test.txt
1 -rw- 248 Aug 29 2000 17:49:36 text.txt
20578304 bytes total (3104544 bytes free)
To Next Page
Loading...
