3Com 5500G-EI - 2 USING PORT COMMANDS; Ethernet Port Configuration Commands

2
USING PORT COMMANDS
This chapter describes how to use the following commands:
Ethernet Port Configuration Commands
■ broadcast-suppression
■ copy configuration
■ description
■ display interface
■ display loopback-detection
■ display port
■ display unit
■ duplex
■ flow-control
■ interface
■ jumboframe enable
■ loopback
■ loopback-detection control enable
■ loopback-detection enable
■ loopback-detection interval-time
■ loopback-detection per-vlan enable
■ multicast-suppression
■ port access vlan
■ port hybrid pvid vlan
■ port hybrid vlan
■ port link-type
■ port trunk permit vlan
■ port trunk pvid vlan
■ reset counters interface
■ shutdown
■ speed
■ unicast-suppression
Ethernet Port Link Aggregation Commands
■ debugging link-aggregation error