3Com 5500G - ACSEI Server Configuration Commands; acsei client close; acsei client reboot

6 ACSEI Server Configuration
Commands
acsei client close
Syntax acsei client close client-id
View ACSEI server view
Parameters client-id: ID of the ACSEI client to be closed, in the range of 1 to 7. (An
ACSEI client ID is assigned by the ACSEI server.)
Description Use the acsei client close command to close the specified ACSEI client.
n
After you close an ACSEI client using the acsei client close command,
the OSN|M where the ACSEI client is integrated is shut down.
Examples # Close ACSEI client 1.
<SW5500G> system-view
System View: return to User View with Ctrl+Z.
[SW5500G] acsei server
[SW5500G-acsei-server] acsei client close 1
acsei client reboot
Syntax acsei client reboot client-id
View ACSEI server view
Parameters client-id: ID of the ACSEI client to be restarted, in the range of 1 to 7.