3Com 5500G - Page 37

To Next Page

To Previous Page

Parameters in-interface: Displays ACFP rule information in order of inbound port.

The ACFP rule which does not include the inbound port is not displayed.

policy: Displays the ACFP rule information in order of policy.

client-id: ACFP client ID, in the range of 1 to 2147483647.

policy-index: Policy index, in the range of 1 to 2147483647.

Description Use the display acfp rule-info command to display ACFP rule

information.

■ When you use this command to display ACFP rule information in order

of policy, if you specify neither client ID nor policy index, the rule

information of all the policies is displayed.

■ When you use this command to display ACFP rule information in order

of inbound port, if you do not specify a port, the rule information of

all the inbound ports is displayed.

Examples # Display ACFP rule information in order of inbound port.

<SW5500G> display acfp rule-info in-interface

ACFP rule total number: 2

ClientID:1 Policy-Index:1 Rule-Index:1

Action:deny Status:active

ClientID:1 Policy-Index:2 Rule-Index:1

SIP:2.2.2.1 SMask:0.0.0.255

Action:deny Status:inactive

# Display ACFP rule information in order of policy.