26
Auto-Configuration Settings
If the Router is able to detect a PPPoE or DHCP server on its
Ethernet Cable/DSL port then it will offer you the option of
configuring its Internet settings automatically. As an example, the
Auto-Configuration screen for PPPoE is shown in Figure 16
below.
Figure 16 PPPoE Auto-configuration Screen
Click Next to accept the option you have chosen and continue.
■ If the Router could not automatically configure your internet
settings or if you chose to configure your Internet settings
manually, continue at “Internet Settings” below.
■ If you chose one of the automatic configuration options
continue at “Choosing your LAN Settings” on page 29.
Internet Settings
The Internet Settings window allows you to set up the Router for
the type of Internet connection you have. Before setting up your
Internet connection mode, have the modem configuration
supplied by your ISP to hand.
Figure 17 Internet Settings Screen
Select the Internet Addressing mode your ISP requires and click
Next. Depending on your selection, refer to:
■ “Static IP Mode” on page 27
■ “Dynamic IP Address Mode” on page 27
■ “PPPoE Mode” on page 28,
■ “PPTP Mode” on page 29.
dua08609-5aaa01.book Page 26 Thursday, September 11, 2003 12:15 PM
To Next Page
Loading...
