20
Figure 8 Internet Protocol Properties
7 Restart your computer.
Windows 95, 98
1 From the Windows Start Menu, select Settings > Control Panel.
2 Double click on Network. Select the TCP/IP item for your network
card and click on Properties.
3 In the TCP/IP dialog, select the IP Address tab, and ensure that
Obtain IP address automatically is selected. Click OK.
4 Restart your computer.
Macintosh OS 8.5, 9.x
If you are using a Macintosh computer, use the following
procedure to change your TCP/IP settings:
1 From the desktop, select Apple Menu, Control Panels, and TCP/IP.
2 In the TCP/IP control panel, set Connect Via: to “Ethernet.”
3 In the TCP/IP control panel, set Configure: to “Using DHCP
Server.”
4 Close the TCP/IP dialog box, and save your changes.
5 Restart your computer.
Disabling PPPoE and PPTP Client Software
If you have PPPoE or PPTP client software installed on your
computer, you will need to disable it. To do this:
1 From the Windows Start menu, select Settings > Control Panel.
2 Double click on Internet Options.
3 Select the Connections Tab. A screen similar to Figure 9 should
be displayed.
4 Select the Never Dial a Connection option and click OK.
dua08609-5aaa01.book Page 20 Thursday, September 11, 2003 12:15 PM
To Next Page
Loading...
