EasyManua.ls Logo

3Com SuperStack 4 - Page 21

3Com SuperStack 4
432 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Command Line Interface 33
Tabl e 5 describes the features of different views and the ways to enter or quit.
Tab le 5 Features of Command Views
Command
view
Function Prompt Command to enter Command to exit
User View Show the basic
information about
operation and
statistics
<SW5500> This is the view you are in
after connecting to the
Switch
quit disconnects
to the Switch
System View Configure system
parameters
[SW5500] Enter system-view in User
View
quit or return
returns to User View
Ethernet Port
View
Configure
Ethernet port
parameters
[SW5500-Ethernet1/0/1] 100M Ethernet Port View:
Enter interface
ethernet 1/0/1 in
System View
quit returns to
System View
return returns to
User View
[SW5500-GigabitEthernet1/0/2
4]
GigabitEthernet Port View:
Enter interface
gigabitethernet
1/0/24
in System View
VLAN View Configure VLAN
parameters
[SW5500-Vlan1] Enter vlan 1 in System
View
quit returns to
System View
return returns to
User View
VLAN Interface
View
Configure IP
interface
parameters for a
VLAN or a VLAN
aggregation
[SW5500-Vlan-interface1] Enter interface
vlan-interface 1 in
System View
quit returns to
System View
return returns to
User View
Local-User
View
Configure local
user parameters
[SW5500-luser-user1] Enter local-user user1
in System View
quit returns to
System View
return returns to
User View
User Interface
View
Configure user
interface
parameters
[SW5500-ui0] Enter user-interface 0
in System View
quit returns to
System View
return returns to
User View
FTP Client View Configure FTP
Client parameters
[SW5500-ftp] Enter ftp in User View quit returns to
System View
RSA Public Key
View
Configure RSA
public key of SSH
user
[SW5500-rsa-public-key] Enter rsa
peer-public-key
SW5500003 in System View
peer-public-ke
y end returns to
System View
RSA Key Code
View
Edit RSA public
key of SSH user
[SW5500-rsa-key-code] Enter public-key-code
begin in RSA Public Key
View
public-key-cod
e end returns to
RSA Public Key View
PIM View Configure PIM
parameters
[SW5500-PIM] Enter pim in System View quit returns to
System View
return returns to
User View

Related product manuals