3Com SuperStack 4 User Manual

34 CHAPTER 1: GETTING STARTED
RIP View Configure RIP
parameters
[SW5500-rip] Enter rip in System View quit returns to
System View
return returns to
User View
OSPF View Configure OSPF
parameters
[SW5500-ospf] Enter ospf in System View quit returns to
System View
return returns to
User View
OSPF Area
View
Configure OSPF
area parameters
[SW5500-ospf-0.0.0.1] Enter area 1 in OSPF View quit returns to
OSPF View
return returns to
User View
Route Policy
View
Configure route
policy parameters
[SW5500-route-policy] Enter route-policy
policy1 permit node
10 in System View
quit returns to
System View
return returns to
User View
Basic ACL View Define the rule of
basic ACL
[SW5500-acl- basic-2000] Enter acl number 2000
in System View
quit returns to
System View
return returns to
User View
Advanced ACL
View
Define the rule of
advanced ACL
[SW5500-acl-adv-3000] Enter acl number 3000
in System View
quit returns to
System View
return returns to
User View
Layer-2 ACL
View
Define the rule of
layer-2 ACL
[SW5500-acl-ethernetframe-40
00]
Enter acl number 4000
in System View
quit returns to
System View
return returns to
User View
User-defined
ACL View
Define the rule of
user-defined ACL
[SW5500-acl-user-5000] Enter acl number 5000
in System View
quit returns to
System View
return returns to
User View
QoS profile
View
Define QoS profile [SW5500-qos-profile-h3c] Enter qos-profile h3c
in System View
quit returns to
System View
return returns to
User View
RADIUS Server
Group View
Configure radius
parameters
[SW5500-radius-1] Enter radius scheme 1
in System View
quit returns to
System View
return returns to
User View
ISP Domain
View
Configure ISP
domain
parameters
[SW5500-isp-3Com.net] Enter domain 3Com.net in
System View
quit returns to
System View
return returns to
User View
Table 5 Features of Command Views
Command
view
Function Prompt Command to enter Command to exit

3Com SuperStack 4 Specifications

General

Brand	3Com
Model	SuperStack 4
Category	Switch
Language	English