276 CHAPTER 11: 802.1X CONFIGURATION
Perform the following configurations in ISP Domain View.
Table 306 Enabling the Selection of the RADIUS Accounting Option
By default, the selection of RADIUS accounting option is disabled.
The accounting optional command can also be configured in the RADIUS
scheme view which is only effective on the accounting that uses this RADIUS
scheme. If this command is configured both on an ISP domain and the RADIUS
scheme it uses, the latest configuration will take effect.
Enabling/Disabling the
Messenger Alert
Messenger alert function allows the clients to inform the online users about their
remaining online time through the message alert dialog box.
The implementation of this function is as follows:
■ On the switch, use the following command to enable this function and to
configure the remaining-online-time threshold (the
limit
argument) and the
alert message interval.
■ If the threshold is reached, the switch sends messages containing the user's
remaining online time to the client at the interval you configured.
■ The client keeps the user informed of the updated remaining online time
through a dialog box.
Perform the following configuration in ISP domain view.
By default, messenger alert is disabled on the switch.
Configuring Self-Service
Server URL
The self-service-url enable command can be used to configure self-service server
uniform resource locator (URL). This command must be incorporated with a
RADIUS server (such as a CAMS) that supports self-service. Self-service means that
users can manage their accounts and card numbers by themselves. And a server
with the self-service software is called a self-service server.
Once this function is enabled on the switch, users can locate the self-service server
and perform self-management through the following operations:
■ Select Change user password on the 802.1x client.
■ After the client opens the default explorer (IE or NetScape), locate the specified
URL page used to change the user password on the self-service server.
Operation Command
Enable the selection of RADIUS accounting option accounting optional
Disable the selection of RADIUS accounting option undo accounting optional
Table 307 Enabling/disabling message alert
Operation Command
Enable messenger alert and configure the
remaining-online-time threshold and the interval at
which the alert message is sent
messenger time enable limit
interval
Disable messenger alert messenger time disable
Restore the messenger alert as the default setting undo messenger time
To Next Page