Logging Function 333
When defining the information sent to the control terminal,
channel-number
or
channel-name
must be set to the channel that corresponds to the Console
direction.
Every channel has been set with a default record, whose module name is default
and the module number is 0xffff0000. However, for different channels, the default
record may have different default settings of log, trap and debugging. When there
is no specific configuration record for a module in the channel, use the default
one.
If you want to view the debugging information of some modules on the Switch,
you must select debugging as the information type when configuring information
source, meantime using the
debugging command to turn on the debugging
Switch of those modules.
You can use the following commands to configure log information, debugging
information and the time-stamp output format of trap information.
Perform the following operation in System View:
Tab le 394 Configuring the Output Format of Time-stamp
4 Enable terminal display function
To view the output information at the control terminal, you must first enable the
corresponding log, debugging and trap information functions at the Switch.
For example, if you have set the log information as the information sent to the
control terminal, now you need to use the
terminal logging command to
enable the terminal display function of log information on the Switch, then you
can view the information at the control terminal.
Perform the following operation in User View:
Tab le 395 Enabling Terminal Display Function
Sending the Information
to Te ln et Te r min a l or
Dumb Termina
l
To send information to a Telnet terminal or dumb terminal, follow the steps below:
1 Enabling info-center
Perform the following operation in System View.
Operation Command
Configure the output format of
the time-stamp
info-center timestamp { log | trap |
debugging } { boot | date | none }
Output time-stamp is disabled undo info-center timestamp { log | trap
| debugging }
Operation Command
Enable terminal display function of debugging
information
terminal debugging
Disable terminal display function of debugging
information
undo terminal debugging
Enable terminal display function of log information terminal logging
Disable terminal display function of log information undo terminal logging
Enable terminal display function of trap information terminal trapping
Disable terminal display function of trap information undo terminal trapping
To Next Page