Do you have a question about the 3D innovations DeskCycle2 and is the answer not in the manual?
Product Name | DeskCycle 2 |
---|---|
Category | Fitness Equipment |
Resistance Levels | 8 |
Dimensions | 24 x 20 x 10 inches |
Weight | 23 pounds |
Weight Capacity | 300 pounds |
Type | Under Desk Bike |
Display Metrics | Speed, Time, Distance, Calories |
Battery | AAA batteries |
Compatibility | Compatible with most desk heights |
Important warnings to prevent physical injury or damage to the DeskCycle.
General safety guidelines and instructions before using the DeskCycle.
Recommendations for consulting a doctor before starting an exercise program.
Step-by-step instructions for attaching the large leg component.
Step-by-step instructions for attaching the small leg component.
Instructions to level the bike and properly tighten leg nuts.
Detailed steps for correctly installing the left and right pedals.
Guide on how to insert the battery into the display unit.
Instructions for connecting and mounting the LCD display.
Proper pedaling technique to keep the bike stationary.
Advice on keeping the upper body stable while pedaling.
Guidance on foot positioning during downward pedal stroke.
Recommendation for optimal resistance settings during desk work.
Tips for comfortable and effective use with desks.
Solutions for when knees hit the underside of the desk.
Method for using the DeskCycle for cardiovascular exercise.
Suggestions for alternative usage scenarios beyond desk work.
How to use the button to cycle through display modes.
Description of the display mode that cycles through data.
Details on displaying pedal speed in Revolutions Per Minute.
Details on displaying the total distance pedaled.
Details on displaying the total time used.
Details on displaying estimated calories burned.
How to reset distance, time, and calorie counters.
Information on automatic display activation and deactivation.
Explanation of how the online calculator provides accurate estimates.
Details on personal data used for improved calorie estimates.
Instructions for connecting and positioning the display stand.
Guidance on when the tether is needed for stability.
Step-by-step instructions for installing the Velcro tether.
First step to separate the pedal halves using a screwdriver.
Second step to release a snap-fitting on the pedal.
Third step to separate pedal halves through a side gap.
Final step to release pedal halves by twisting screwdriver.
Instructions for detaching the pedal straps from the posts.
Guidance on pressing the pedal halves back together.
Explanation of the 8 tension settings and how to adjust them.
Instructions for securing the DeskCycle using a laptop lock.
Steps to change the pedal height between 9 and 10 inches.
Description of accessories for chair stability and floor grip.
Basic usage guidelines, emphasizing not to stand on pedals.
Information that the DeskCycle requires no maintenance.
Advisory against lubricating sealed bearings.
Guidance on where to find answers and support.
Details of the one-year warranty for US customers.
Specifics on what parts, labor, and shipping are covered.
Information on what is not covered by the warranty.
How to obtain service and the warranty registration process.
Common issues encountered during pedal installation.
Ensuring the left pedal is installed in the left arm and vice-versa.
Guidance on properly screwing in pedals to avoid cross-threading.
Troubleshooting steps for when the DeskCycle makes noise.
First troubleshooting step for noise: tighten pedals.
Second troubleshooting step for noise: tighten leg nuts.