3M 28408 - User Manual

1
SANDER INSTRUCTION MANUAL
101 mm (4 in.)–127 mm (5 in.)
12,000 RPM
Important Safety Information
Please read, understand and follow all safety information contained in these instructions prior to the use of this tool.
Retain these instructions for future reference.
Intended Use
This pneumatic tool is intended for use in industrial locations, and used only by skilled, trained professionals in accordance with the instructions in this manual. This
pneumatic tool is designed to be used with disc pads, and appropriate abrasive for sanding metals, wood, stone, plastics and other materials. It should only be used
for such sanding applications and within its marked capacity and ratings. Only accessories specically recommended by 3M should be used with this tool. Use in any
other manner or with other accessories could lead to unsafe operating conditions.
Do not operate tool in water or in an excessively wet application.
Do not use disc pads that have a Max RPM less than the tool Max RPM rating.
Tools shall be inspected periodically to verify that ratings, markings, and labels are legible. Contact 3M Company to obtain replacement labels.
Summary of device labels containing safety information
Marking Description
WARNING: READ AND UNDERSTAND INSTRUCTION MANUAL BEFORE
OPERATING TOOL.
WARNING: ALWAYS WEAR APPROVED EYE PROTECTION
WARNING: ALWAYS WEAR APPROVED HEARING PROTECTION
WARNING: AVOID PROLONGED EXPOSURE TO VIBRATION
Direction of Rotation
Prolonged vibration may cause injury Vibration Safety Note
12,000 r/min Maximum Rotational Speed
90 PSIG / 6.2 BAR MAX Maximum Air Pressure
Use accessories rated at tool speed or higher Accessories Speed Warning Note
Explanation of Signal Word Consequences
W WARNING: Indicates a potentially hazardous situation which, if not avoided, may result in death or serious injury and/or property damage.
W CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury and/or property damage.
Original Instructions
W WARNING!
Read the Safety
Data Sheets (SDS)
before using any materials.
Contact the suppliers of the
workpiece materials and abrasive
materials for copies of the SDS if
one is not readily available.
Exposure to DUST generated from
workpiece and/or abrasive materials
can result in lung damage and/or
other physical injury.
Use dust capture or local exhaust as
stated in the SDS. Wear government-
approved respiratory protection and
eye and skin protection.
Failure to follow this warning can
result in serious lung damage and/or
physical injury.
SDS
FSSS
HDS

Summary

Important Safety Information

Intended Use

Describes the pneumatic tool's intended applications and limitations for safe operation.

Summary of Device Labels

Lists markings on the tool and their corresponding safety descriptions.

Signal Word Consequences

Defines the meaning of signal words like WARNING and CAUTION for hazard communication.

Safety Precautions

General Warnings

Details safety precautions to reduce risks from impact, noise, vibration, and other hazards.

Cautionary Notes

Provides safety advice for reducing risks related to whipping, pressure, rupture, and flying accessory parts.

Parts List

Assembly Requirements

Lists torque specifications and threadlocker recommendations for tool assembly.

Parts Identification

Provides a detailed list of part numbers and descriptions for the sander components.

Product Configuration and Specifications

Specifications Table

Details model number, disc size, speed, weight, dimensions, noise, and vibration levels.

Operating and Maintenance Instructions

Guidance on proper air supply, lubrication, and maintenance for the tool.

Disc Pad Accessories

3 M Roloc Disc Pads

Information on 3M Roloc disc pads designed for use with the 3M Sander.

Warranty and Limited Remedy

Warranty Terms

Details the one-year warranty against defects in workmanship and materials.

EC Declaration of Conformity

Declaration that the machinery complies with essential health and safety requirements.

3M 28408 Specifications

General

Brand	3M
Model	28408
Category	Sander
Language	English