EasyManua.ls Logo

3M 33575 - User Manual

3M 33575
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATOR’S MANUAL & SAFETY INSTRUCTIONS
3M™ File Belt Sander
PN 33573 330 mm (13 in.) 17,000 RPM
PN 33575 457 mm (18 in.) 17,000 RPM
For more information visit our website
3MCollision.com
2017-02-21, Version 2
Translation of Original Instructions

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the 3M 33575 and is the answer not in the manual?

3M 33575 Specifications

General IconGeneral
TypeRandom Orbital Sander
Power SourcePneumatic
Speed12, 000 RPM
Weight1.2 lbs
Attachment MethodHook and Loop
Dust CollectionYes
Product TypeSander
Belt SizeNot applicable
Diameter5 inches
Disc Diameter5 inches

Summary

IMPORTANT SAFETY INFORMATION

Device Labels and Health Hazard Information

Summarizes device safety labels and details health hazards from dust, including California Proposition 65.

GENERAL POWER TOOL SAFETY PRECAUTIONS

Work Area Safety

Guidelines for maintaining a safe and clean work environment to prevent accidents.

Personal Safety

Essential personal safety measures, including air supply precautions and protective equipment.

WARNING

Specific Hazard Mitigation Procedures

Covers risks from impact, abrasion, vibration, noise, dust inhalation, foot injury, and voltage.

CAUTION

Hazards Associated with Whipping, Pressure-Rupture, and Abrasive Fly-off

Mitigates risks from hose issues, pressure, and abrasive product detachment.

INTENDED USE

EXPLODED SANDER (PARTS) VIEW

MAINTENANCE;LUBRICATING AND OPERATING INSTRUCTIONS

GENERAL SET UP AND USE

TO INSTALL;REMOVE THE ABRASIVE BELT

TO INSTALL;REMOVE THE CONTACT ARMS

TO INSTALL;CHANGE THE CONTACT WHEEL

REPLACEMENT PARTS

Related product manuals