At a Glance:
• Premium performance progressive porosity sediment cartridge(s)
• For hot and cold water applications
• 3/4” NPT Connections
Applications:
• Sediment / Rust
• Chlorine Taste & Odor
Product Benefi ts:
• Heavy-duty 316 stainless steel head and 304 stainless steel housing rated to 300
psi (2,069 kPa) maximum operating pressure for maximum strength and durability
• Premium performance, high effi ciency AP110 progressive porosity depth cartridge
• Manufactured from FDA CFR-21 compliant materials
• High Flow, dual cartridge AP2610SS model for high water demand applications and
less frequent cartridge changes
• 3/4” unrestricted fl ow design for high fl ow rates with minimal pressure drop
• “Sure-Seal” ring nut connector with tightening tool allowing for positive cartridge
sealing
• Complete installation manual is enclosed for easy reference and simple installation
Models:
AP1610SS / AP2610SS
Stainless Steel Water Filters
Product Specifi cations:
Spec #
Quantity
Model No.
(Part No.)
Inlet/
Outlet
Size
Dimensions
Flow
Rate
Clean Pressure
Drop
Max.
Water
Temp.
Max.
Water
Pressure
Degree of
Filtration
Std.
Replacement
Ctg. No.
Height Diameter
AP1610SS
(5592002)
3/4”
NPT
12-7/32”
(31 cm)
4-5/32”
(10.6 cm)
8 gpm
(30.3 lpm)
2 psi @ 8 gpm
(13.8 kPa @ 30 lpm)
170°F
(76.7°C)
300 psi
(2,070 kPa)
5 Micron
Nominal
AP110
AP2610SS
(5592003)
22-1/32”
(56 cm)
4-5/32”
(10.6 cm)
16 gpm
(60.6 lpm)
4 psi @ 16 gpm
(27.6 kPa @ 61 lpm)
AP110 (Qty. 2)
AP1610SS
AP2610SS
*Dependent upon cartridge used
To Next Page
Need help?
General
