3
C1060 Battery Charger Power Supply Plug May Fall Out
The power supply plug may fall out of some C1060 Battery Chargers. The plastic portion of the power
supply plug can easily be trimmed with a razor knife to allow a snug fit. See illustration:
The power receptacle was assembled too far into the case of a few chargers within the following serial
number range:
C1060 3-slot charger s/n 0933005550 thru 0933005700
C1060 6-slot charger s/n 0936005020 thru 0936005170
C1060 chargers with this problem may also be shipped to the 3M Repair Center for warranty repair.
Trim the plastic portion of
power supply plug
To Next Page
Loading...
