25
3M
™
Pocket Projector MP180
© 2011 3M. All Rights Reserved.
English
Transferring a File from the Projector
The MP180 can transfer a file to another Bluetooth enabled device that supports
Object Push Profile. The MP180 and the other device must be paired before the
MP180 will transfer a file. After pairing the two devices, follow these steps to
transfer a file from the MP180 to the other Bluetooth enabled device:
1 Follow the instructions in the manual for the other device and set the device to
listen or ready to receive a file, if needed.
2 Tap the Bluetooth button.
3 Tap the Upload button.
4 Select a file from the file list you wish to send to the other Bluetooth device.
5 Follow the instruction in the manual of the other device to accept the file sent
by the MP180.
Transferring a File to the Projector
1 Tap the Bluetooth button.
2 Tap the Download button.
3 The MP180 will begin to listen.
4 Follow the instruction in the manual of the other device to send the file to the
MP180.
5 All files transferred using Bluetooth are located in the MyReceivedFiles folder
on the MP180 built-in memory. You can open the newly transferred file using
the respective MP180 file viewer.
Managing Files Using File Transfer Profile
The MP180 supports the Bluetooth File Transfer Profile. A host device, such as a
computer, can browse and manage the files in the MyReceivedFiles folder on the
MP180. Follow the instruction in the manual for the other device to browse the files
on the MP180.
To Next Page
Loading...
Need help?
General
