To Next PageTo Next Page
Need help?Do you have a question about the 3M SPEEDGLAS SL and is the answer not in the manual?
General| Type | Auto-Darkening Welding Helmet |
|---|---|
| Auto-Darkening Function | Yes |
| Battery Type | Lithium |
| Standards | ANSI Z87.1 |
| Reaction Time | 0.1 ms |
| Power Source | Solar cell with lithium battery backup |
| Grind Mode | Yes |
Instructions to read before using the welding shield for safety.
Explains EN 379 classification and particle protection markings.
Instructions for storing the welding shield properly.
Details on the on/off functionality of the welding shield.
Guide on selecting different shade numbers for welding.
How to adjust the sensitivity of the photo detector system.
Guidance on selecting the appropriate sensitivity level.
How to identify a low battery condition.
Notes on interference, failure to switch, and cautions.
Steps for replacing outer plate, inner plate, filter, headband, and battery.
Recommended operating and storage temperature ranges.
How to inspect and clean the welding shield.
Warnings about correct usage and potential risks.
Warnings for users with allergies or wearing spectacles.
