3M Staff Workstation 795 - Item Placement; Correct Placement; Oversize Items

21
Item Placement
There are six sensors on the
workstation deck. Sensors 6 and 1
are “edge sensors.” Sensors 5, 4, 3,
and 2 are “inner (or non-edge)
sensors.”
Correct Placement
Items correctly placed on the deck
must be (Figure 8):
 Touching the back wall (a) (for
books, the spine should be
touching the back wall),
 Within (inside of) the edge
sensors on the deck (b), and
 Covering at least two adjacent
inner sensors (c).
6
5
43
2
1
Figure 8: Correct placement on deck (top view)
c
a
b
Oversize Items
If the item cannot fit between the edge sensors, on-screen instructions
enable you to process the item.
Refer to the following pages for examples of correct and incorrect placement
of bar-coded items and items with RFID Tags.