3M WORKTUNES WIRELESS - Battery Status and Auto Shut-off

1110
Bluetooth
®
Mode
Press the source button
to activate Bluetooth
®
Mode
Bluetooth
®
Mode allows you to connect
earmus to your Bluetooth
®
Device.
01 Pair Device
Press and hold the function button for 2 seconds
to enter Bluetooth
®
Pairing Mode. On your device,
connect to “Worktunes Wireless” using Bluetooth.
You will hear “Bluetooth Connected” when your
device is paired successfully.
02 Fwd/Bck or Pause/Play
Turn the tuning knob to scroll
forward or backward. Press the
tuning knob in to pause/play.
01 02
Audio Input Mode
Connect the device
to auto activate Input Mode
Audio Input Mode allows you to
directly connect earmus to any device.
Note: You can also use the source button to activate Input Mode.
01 Connect Device
Connect the device using only the
included 4-pole stereo audio cable.
Turn on headset. Use headset to
control ambient volume. Use device
to control input.
02 Fwd/Bck or Pause/Play
Turn the tuning knob to scroll
forward or backward. Press the
tuning knob button to pause/play.
0201
4-pole
stereo
audio
cable