3M WorkTunes - Bass Boost

10
2. Forward/Back or Pause/Play
Turn the Tuning Dial to scroll forward or backward.
Press the Tuning Dial in to pause/play.
Incoming Calls
Once paired, incoming phone calls will cause the music to
be muted (regardless of the input mode selected) and you
will hear your phone
’
s ringtone.
To answer an incoming call, press the center of the Tuning
Dial once. To disconnect from a call, press the Tuning Dial
once more. After disconnecting from the call you will hear
“Call Terminated.” To reject a call and return to Bluetooth ®
audio, press and hold the center of the Tuning Dial. After
rejecting a call you will hear “Call Terminated.”
1. Pair the Device Function
Press Source button to activate Bluetooth ® Mode. Next, press and hold
the Function button for two seconds until you hear, “Bluetooth Pairing
On”. On your device, connect to “Worktunes Wireless” using Bluetooth ® .
You will hear “Bluetooth Connected” when your device is paired
successfully. Set the device volume to its maximum level and use the
On/Off/Volume knob to control the volume of the hearing protector.
WorkTunes
TM
Connect + AM/FM
Hearing Protector Bluetooth ® Range
The typical range between a Bluetooth ® device and the WorkTunes
TM
Connect + AM/FM Hearing Protector is approximately 25 feet.
This distance may vary depending on the device. As the distance between
the Bluetooth ® device and the hearing protector is increased, the risk of
signal dropouts will also increase.
For best results, keep your Bluetooth ® device on your body or within
arm
’
s length of the WorkTunes
TM
hearing protector while using
Bluetooth ® mode.
Bluetooth
®
Mode
Bluetooth ® Mode allows you to connect
hearing protector to your Bluetooth ® Device.