To Next Page

To Previous Page

AM/FM Mode

Select Mode

Press the Source button to activate

AM/FM Mode. This mode will allow

you to scan through all stations.

Tune or Seek

Turn the Tuning Dial clockwise to

scroll through all stations. Press the

Tuning Dial in to seek stations.

Save Stations

Press and hold the

Function button for

2 seconds to save

a station.

AM/FM Radio Mode allows you to scan through

all radio frequencies, save your favorite stations,

and recall your saved stations.

Change Frequency Spacing for WorkTunes

Connect + AM/FM Hearing Protector

With the hearing protector off, press and hold the Power button and center of the

Tuning Dial together. Voice Assist will announce “Settings Mode.” Use the Tuning

Dial to scroll through the settings and press the center to select the appropriate

setting and move onto the next function in the menu. Select 10 kHz for North

America (default) and 9 kHz for Australia and Europe. Press the Function key to exit.

Other manuals for 3M WorkTunes

Questions and Answers:

Need help?

Do you have a question about the 3M WorkTunes and is the answer not in the manual?

General