Need help?Do you have a question about the 3ntr A4v3 and is the answer not in the manual?
General| Nozzle Diameter | 0.4 mm |
|---|---|
| Extruder Count | 1 |
| Connectivity | USB, Ethernet |
| Filament Diameter | 1.75 mm |
| Heated Bed | Yes |
| Bed Temperature | up to 120°C |
| Frame Material | Aluminum |
| Filament Compatibility | PLA, ABS, PETG, TPU, Nylon |
| Printing Technology | FDM |
| Power Requirements | 110-240V, 50-60Hz, 350W |
| Layer Resolution | 0.05 - 0.4 mm (50 - 400 microns) |
Covers potential hazards like burns, pinching, fire, toxic fumes, and electrical safety.
Outlines product warranty, claim procedures, guarantee period, and exclusions.
Guides users through unpacking the printer and identifying included components.
Details mounting spool holders, filament feeders, and connecting cables.
Explains PC connection, driver installation, and Repetier Host software setup.
Covers loading, removing, and switching filament types for printing.
Instructions for loading and removing the print tray onto the heated bed.
Describes initiating and managing prints via PC, SD card, or print server.
Details the procedures for assembling, changing, and maintaining extruders.
Covers filament handling, tray cleaning, feeding roller, and extruder cleaning.
Guides on performing Z nozzle leveling and XY nozzle alignment for print quality.
Discusses periodic checks, liquid cooling, lubrication, and firmware updates.
Explains the printer's LCD interface, menus, and control options.
Provides solutions for extrusion, print adhesion, movement, and connectivity problems.
To Next Page
