Need help?Do you have a question about the 3ntr A2v2 and is the answer not in the manual?
General| Brand | 3ntr |
|---|---|
| Model | A2v2 |
| Category | 3D Printers |
| Language | English |
Describes hazards associated with hot printer surfaces and precautions.
Warns about potential injury from sudden machine movement.
Details precautions against flammable substances and proper ventilation.
Advises on temperature settings and ventilation for filament fumes.
Outlines risks related to moisture, dust, and electrical components.
Details on connecting the printer to a PC and installing necessary drivers.
Guide to downloading and installing the recommended printer management software.
Steps to configure the printer connection within Repetier Host software.
Configuration settings for printer behavior and movement in Repetier Host.
Configuration of extruder properties like temperature, diameter, and offsets.
Setting print area dimensions and origin points in Repetier Host.
Overview of different ways to start and manage prints (PC, SD card, server).
Detailed steps for calibrating nozzle height relative to the print bed.
Methods for adjusting nozzle alignment offsets via firmware or software.
Steps for downloading and installing new firmware using XLoader.
Steps to restore default parameters after a firmware upgrade.
Configuration of acceleration, jerk, and speed settings for axes and extruders.
Diagnosing and resolving issues with little or no filament extrusion.
Solutions for parts not sticking to the print plate.
Resolving gaps, nozzle jams, and print interruptions.
To Next Page
