48
USER MANUAL
AWT09MLEDSD
Copyright 2018, 3rd Eye
Printed in U.S.A.
Issued October 2018
Notice
NOTICE
1. When tidying up, G-Mouse wire should not be folded as the below left photo.
2. Power+ should not be connected to ACC directly to prevent hard disk from power input.
3. Do not remove SD card when updating; otherwise, the system may not start because of data missing.
4. When moving out hard disk, operator should wait until the power light completely shut down before loosening bolts, or
the last data may be missed.
5. Do not cut off the monitor power off directly.
6. SIM / SD card should be inserted before DVR system starting and withdrawn after completely shutting down.
7. To avoid damages of camera / DVR, please make sure the pin assignment of cable before connecting.
To Next Page
Loading...
