11Numbers in black circles refer to diagrams on pages 4 & 5
To take a still image, make sure the camera
is in photo capture mode which should be
displayed on the LCD panel
3
. If not, short
press the button repeatedly until appears.
To capture an image
Short press the Shutter
(
1
) button. There will be a
beep sound and the Infrared Light
7
will ash red which
indicates that an image is being processed by the camera.
Sound Setting Mode
Sound is enabled by default. In video or photo
mode, press and hold the Shutter
(
1
) button to mute sound. The mute icon
will be displayed on the LCD panel
3
when the
sound is muted.
Long press the Shutter
(
1
) button to activate
the sound.
Photo Capture Mode
Numbers in black circles refer to diagrams on pages 4 & 5
To Next Page
Loading...
