10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
2 Adjusting Angle of the Camera
Steps:
1). Adjust the camera to the desired angle by unscrewing the joints referring to the following pictures.
2). Connect to the web page of the device to see its real-time image in order to check whether its angle is
correctly adjusted. Refer to Section 5: View Video on Camera Web Interface for details about using its
web page.
3 Adjusting Zoom and Focus
Steps:
1). Unscrew the zoom puller and the focus puller counter-clockwise.
2). Adjust the zoom and the focus of the lens.
3). Tighten the zoom puller and the focus puller again by turning it
clockwise after the zoom and the focus are properly adjusted.
CAUTION:
Manual adjustment of Zoom and Focus is only possible on the VX-2A-B-IWD model version. Zoom and Focus
controls can be configured digitally from the camera’s web interface for VX-2A-B-RIWD models. See the VISIX
V-Series All-in-One Camera User Manual for more details on adjusting lens settings from the camera’s web
interface.
To Next Page
Need help?
General
