4EVAC Compact 500 - Initial Access and Permissions; Unboxing Procedure

Hacousto Holland bv
Industrieweg 87
2651BC Berkel & Rodenrijs
4EVAC Compact 500 operation manual
Author:
DD
Page 4 of 15
3. Standalone vs network operation
4EVAC Compact 500 is capable of both standalone and network operation.
Standalone system
A standalone Compact 500 comprises of a single C500 main unit, which incorporates:
Mandatory indications and manual controls
System status outputs: EVAC, FAULT, RESET
6 monitored EVAC inputs
Monitored SILENCE and RESET input
8 x GPI
8 x GPO
Up to 6 loudspeaker lines with EOL monitoring
100W or 200W maximum power per line
2 analog balanced audio inputs
Integrated Fireman Microphone with priority
Access key-lock to enable/disable front panel functionality
6 programmable zone selection buttons
Integrated power supply with battery
Network system
3.2.1. Global network (G-Net)
G-Net is a redundant network ring where multiple C500 main units may be connected into one system. It
is used for reliable data synchronization between all connected devices and for multi-channel live audio
transmission with very low latency.
G-Net redundant ring topology